DIN 913/914/915/916 Hexagon Socket Set Bolt Carbon Steel

설명

제품 이름	Hexagon Socket Set Bolt
크기	M3-24
Length	3-60mm or as required
등급	4.8/8.8/10.9/12.9
재료	Steel/35k/45/40Cr/35Crmo
표면 처리	Black/Zinc
표준	DIN/ISO
인증서	ISO 9001
샘플	무료 샘플

Usage:

In use, the set screw is screwed into the screw hole of the part to be fixed, and the end of the screw is pressed against the surface of the other part, even if the former part is fixed on the latter part. Slotted and hexagon socket set screws are used on the parts where the nail head is not allowed to be exposed, and square head set screws are used on the parts where the nail head is allowed to be exposed.

표면 처리:

BLACK

—–Black is a common method for metal heat treatment. The principle is to make an oxide film on the metal surface to isolate the air and achieve rust prevention. Blackening is a common method for metal heat treatment. The principle is to make an oxide film on the metal surface to isolate the air and achieve rust prevention.

DIN914 Hexagon Socket Set Screws With Cone Point
DIN 914 are suitable for machines with low strength; non-pointed taper screws are suitable for machines with recesses on the pressing surface to increase the ability to transfer

DIN 913 Hexagon Socket Set Screws With Flat Point
DIN 913 (the pressing surface should be flat) and recessed-end screws are suitable for the parts with high hardness or frequently adjusted position.

DIN916 Hexagon Socket Set Screws With Cup Point
DIN 915 are suitable for tubular shafts (on thin-walled parts, the cylindrical end enters the eyelet of the tubular shaft to transmit a larger load, but there should be a device to prevent the screws from loosening when used.

cp7